Suspension

When you need to go really big, reach for the 38. The 38 redefines the capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability. Welcome to the big time. FOX's GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper they've created. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference. - GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper FOX has created - Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction, and experience reduced fatigue - Lower leg bleeders allow atmospheric pressure equalization at the push of a button, and the bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel for better fork performance by increasing small bump sensitivity and responsiveness - The lower leg arch design of the 38 shaves every possible gram while maximizing stiffness and strength requirements of enduro and gravity riding - Fitted with the proven and reliable FLOAT EVOL air spring - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added durability

When you need to go really big, reach for the 38. Optimized for 160-180mm of travel, the 38 redefines capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability.?Welcome to the big time. GRIP X2 Ultimate descending performance with greater traction and even more control at speed. The most tunable, supportive and smoothest descent-focused damper created by FOX. KABOLT X AXLE A lightweight bolt-on floating axle that shaves grams while increasing torsional stiffness and reducing friction between upper and lower fork legs for smoother suspension travel. LOWER LEG BLEEDERS AND BYPASS CHANNELS Push-button pressure equalization (bleeders) and increased volume to alleviate pressure ramping (bypass channels) allow improved small bump sensitivity and responsiveness. DAMPER GRIP X2 DAMPER CONTROLS HSC - LSC - HSR - LSR AXLE Kabolt-X 110 RAKE 44mm STEERER 1.5 Tapered UPPER TUBE FINISH Kashima AIR CHANNELS Yes BLEEDERS Yes FLOATING AXLE Yes ROTOR SIZE 180 direct Post Mount, Up to 230 compatible MUD GUARD MOUNT Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment AIR SPRING FLOAT EVOL STARTING WEIGHT 2194g (38, 29, F-S, 180, Grip X, Kabolt X)

Built for the best riders, ridden on the hardest tracks, ZEB Ultimate rules the world’s toughest enduros. Equipped with the new Charger 3.1 RC2 damper, ZEB gives riders exceptional adjustability for the right balance of comfort, control, and speed. Alongside this flagship damper, the stout 38mm chassis rides on vibration-killing ButterCups and a DebonAir+ spring. The technology you need for the fastest split times, the style you want on the start line: This is ZEB. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in Signature colorways Electric Red, Slab Grey or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

- Performance-packed, featuring an updated 38mm chassis, now compatible with new Pressure Relief Valves. - 38mm chassis for increased stiffness and rider confidence - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - Compatible with new Pressure Relief Valves - Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride - Bolt-in torque cap adapters now included for the use with standard hub end caps

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look

The Machete is purpose-built for slicing trails, with Kwik Toggle compression damping inspired by our renowned Absolute+ technology. Kwik Toggle achieves on/off lockout simplicity in a lightweight, practical package. - TS air spring with in-leg adjustable TPC rebound damping - Kwik-Toggle damper with lockout, adjustable rebound, and high-speed compression - 32mm black anodized stanchions with hollow bore forged aluminum crown - Easily upgradeable to remote using MILO upgrade kit part #314934 - Travel is internally adjustable from 80 to 120mm in 10mm increments - Disc brake only (74mm/6" post-mount) - 27.5x3.0"/29x2.5" maximum tire width

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

Invert smoothes your ride and gives unbelievable control of your bike on rough roads, loose turns, and steep descents. It’s surprisingly lightweight, easy to use, and strikingly attractive. Riding beyond the pavement can be rough, physically taxing, and unpredictable. Invert goes straight to the source of this problem to offer a smoother ride with more traction, both uphill and down. With Invert, you’ll be more efficient, more relaxed, and have confidence to glide over gravel like you’ve never experienced before. - Inverted design promotes smoothest possible operation, lightest weight, & cleanest visual integration by using a layout opposite to conventional suspension forks - Features Climb Switch that engages a firm setting for out of the saddle pedaling - Gravel-Specific? tuned, progressive air spring balances traction with the right amount of support and is fully adjustable for rider weight (Max Weight: 350 lb / Max PSI: 250 psi) - Premium carbon fiber crown and steerer is bonded to aluminum upper tubes to provide an incredibly strong and lightweight fork (1113 g) - Flat-Mount disc for 160mm rotor (Mounting bolts included) - Integrated 36-degree angle crown race - Included with fork: Ancora Premium Expansion Plug, 52mm ZN40 headset bearing, Brake caliper mounting bolts, and Thru-Axle - Hand-built in Fletcher, NC

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance. - 80-120mm travel - External rebound - TurnKey lockout controls - Fast Black upper tubes - Motion Control RL damper - Compatible with OneLoc remote - Solo Air spring

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout. Features - New graphics package with E-MTB endorsement option (15x110mm) - TurnKey lockout gives 'on/off' control - Fits Tires up to 2.8" (15x110mm) - Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look - Plush, highly tunable Solo Air spring - Disc brake compatible - Offset: 51mm (29-inches) - Steerer Diameter: 1.5-inch Tapered

The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top-level performance to a new price point.

Redesigned by the world’s fastest racers, for the world’s fastest racers, you want BoXXer in your corner. The all-new 38mm chassis is equipped with the DebonAir+ twin tube air spring that will have you thinking it’s a coil. Paired with a Charger 3 RC2 damper tuned for downhill speed, BoXXer Ultimate takes you straight to the top step of the podium. And with our new crown adjustment lines, setup is a breeze—no rulers required. FEATURES - 38mm chassis designed to meet the needs of the world’s fastest racers with balanced stiffness and ride quality - DebonAir+ twin tube air spring strikes the perfect balance between butter-smooth small bump feel, added support throughout the travel, and taller ride height for confidence when things get steep - Signature colorway BoXXer Electric Red with an all-new graphics package - RockShox premium fender compatibility (RockShox Bolt-On Fender included with purchase) - Lightweight machined and anodized crown for premium looks and durability - Crown height gradient creates a visual guide to simplify setup, no ruler required - Charger 3 damper tuned for BoXXer’s updated chassis and spring. Featuring High Speed Compression, Low Speed Compression, and a revamped Low Speed Rebound, every click is meaningful and exact. This allows the rider to tune to perfection with every click. - ButterCups block 20% of high-frequency “trail chatter” to reduce hand and arm fatigue, leaving you feeling fresh with more control - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride

Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers. - Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included) - Noise management system for near silent performance - Integrated air assist for progressivity and bottom-out control - External preload adjuster to dial-in sag and firmness off the top - Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers - Additional springs sold separately to fine-tune and adjust for rider preference - Rake: 44mm

- 35mm chassis at home on the trail - stiff, playful, and light, really light - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise

Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. •140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) •27.5” and 29” wheels •Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - 37mm stanchions Reverse-Arch design and Hexlock SL2 axle for the ultimate stiffness - Fully adjustable IRT air spring to fine-tune ride feel - Sealed MC2 damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork

Trail riders have long had to choose between over-forking for stiffness or under-forking for lower weight. The 36 SL Performance Elite suspension fork takes the new 36 chassis and saves weight at strategic locations, creating a no-compromise lightweight fork for today’s hard-hitting—yet shorter travel—Trail riders. - New generatively designed arch and crown shaping increase torsional stiffness by 20% over 34, while minimizing weight increase - New compliant air spring design reduces chassis friction - New double-butted damper side stanchion sheds grams - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction - New easier to operate, low-profile bleeders

The most versatile fork in our lineup, Lyrik harmonizes descending power with effortless efficiency. Lyrik’s legendary performance enters a new era with the Charger 3.1 RC2 damper that offers a wider tunable range of adjustments for the perfect suspension action. Lyrik Ultimate packs an orchestra of industry-leading tech like the ButterCups technology and a DebonAir+ air spring in a stout 35mm chassis. Now better than ever, Lyrik is ready to push your limits. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in the Signature colorway Heavy Meadow Green or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. The crown is designed to increase stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - GRIP Push-Lock damper features 3-position settings for easy setup and firm mode for pedaling efficiency (Remote sold separately) - The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing weight - Premium 7000 series aluminum crown supports angled upper tubes, rather than relying on extra material to achieve overall rake and steering stiffness - Kabolt SL thru-axle drops an additional 12g over the standard Kabolt axle by eliminating the weight of an axle nut and decreasing the flange diameter - Fitted with the proven and reliable FLOAT EVOL air spring - Black anodized upper tubes for added durability

The award winning 36 continues its all-mountain domination with a reinforced chassis to handle the increased loads of eMTB and World Cup EDR-E racing. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper FOX has created, so riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction, and experience reduced fatigue - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness, and boosting performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and an easy access firm mode for pedaling efficiency - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness, and boosting performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

Trail riders have long had to choose between over-forking for stiffness or under-forking for lower weight. The 36 SL Factory suspension fork takes the new 36 chassis and saves weight at strategic locations, creating a no-compromise lightweight fork for today’s hard-hitting—yet shorter travel—Trail riders. Features Kashima Coating on upper tubes for added smoothness and durability. - New generatively designed arch and crown shaping increase torsional stiffness by 20% over 34, while minimizing weight increase - New compliant air spring design reduces chassis friction - New double-butted damper side stanchion sheds grams - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction - New easier to operate, low-profile bleeders

- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout. Features - New graphics package with E-MTB endorsement option (15x110mm) - TurnKey lockout gives 'on/off' control - Fits Tires up to 2.8" (15x110mm) - Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look - Plush coil spring or highly tunable Solo Air spring - Includes Right PopLoc Remote - Disc brake compatible - Offset: 51mm (29-inches) - Steerer Diameter: 1.5-inch Tapered

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, Recon Silver is an all-around performer suited for any MTB. Features - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look - Includes Right OneLoc Remote

Climb mountains. Charge descents. SID Ultimate isn’t like other XC forks. It is lighter than ever with a formidable 35mm chassis that holds the line when you’re on the edge. The new Race Day 2 damper features a three-position (3P) compression adjuster—rigid Lock, plush Open, and efficient Pedal positions, all at your fingertips. SID adapts to everything from full-gas cross-country to sporty backcountry loops thanks to a new, higher-volume DebonAir+ spring that’s supple at the top of its travel with tons of tunability. Features NEW 35mm chassis is the perfect blend of light weight and rigidity for the modern XC bike. Plus, we made it lighter…again. NEW Charger Race Day 2 damper is the lightest damper on the market. This 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock. NEW DebonAir+ provides more small-bump sensitivity and tunable mid-stroke support. NEW Bushing package maximizes bushing overlap for a smooth, solid ride. NEW Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. NEW Crown machined to shave weight without compromising strength and stiffness. NEW Electric Red Signature colorway NEW Bolt-in torque cap adapters included for use with standard hub end-caps

The ZEB Select is packed with performance in a stout 38mm chassis and features the updated DebonAir air spring with the trusted Charger RC damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance anywhere you need it to be. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper features low-speed compression adjustment - Dual Position Air adjustment option to change the geometry of the bike for climbs and descents - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise

- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender