Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Parts

Wheels Manufacturing Inc. Grade 25 Loose Ball Bearings
$0.10 - $12.50
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25 bearings are Dura-Ace or Campagnolo Record quality.
Wheels Manufacturing Inc. Silver Aluminum Cable Housing Ferrules: Bottle of 100
$0.25
- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 5mm ID for use with most braking cables - 100-count bottle
Sunlite Housing Ferrules
$0.39
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Sunlite Cable End Button
$0.79
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
Cane Creek 10-Series Interlok Headset Spacer
$0.90
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Sunlite Stem Binder Bolt
$0.99
- w/Nut - 1-3/4-inch
Sunlite Stem Bolt
$0.99
- 8x1mm Allen head
Sunlite Sunlite Derailleur Clamp Bolt
$0.99
- Model: Replacement bolt - Compatibility: Allen, M5x16
AheadSet Universal Preload Bolt
$1.00
- Aheadset preload adjusting bolt
Hayes Rotor Kit
$1.00 - $47.25
- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm
Hayes Rotor Kit
$1.00 - $52.50
- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm
KMC Missinglink Connector
$1.00 - $48.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Wheels Manufacturing Inc. Individual Chainring Spacer
$1.00 - $17.84
- For chain and derailleur alignment - 20 per bag
Wheels Manufacturing Inc. Pedal Washers
$1.00
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Wolf Tooth Components 25mm B-Screw
$1.00
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
Hayes Bleed Kit Adapter
$1.05 - $9.90
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Cane Creek 1-1/8-inch Headset Shim Spacer
$1.08
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Sunlite Adjusting Barrel
$1.19
- Aluminum w/lock nut - 18mm long/6mm O.D.
Sunlite Anchor Bolt
$1.19
- Replacement cable anchor bolt for brakes - Includes nut and washer
Sunlite Crank Dust Cap
$1.19
- Crank dust cap - Works with most three-piece crank models
Dimension Anodized Bolt M5x.8 16mm
$1.25
Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually
KMC 415H Connecting Link
$1.35
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
Sunlite Adjusting Barrel w/ Mount
$1.39
- Aluminum w/lock nut and mount - Slotted mount design
Sunlite Hex Head Seat Binder Bolt and Nut
$1.39
- Chrome - Sold individually
Sunlite Seatpost Top Plate Bolt
$1.39
- M8 Top Plate Bolt
Wheels Manufacturing Inc. Pedal Washer
$1.44
- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, Dependent on pedal thread length engagement
KMC Half Link Adapter
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Origin8 Rubber End Plugs
$1.70
Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.
Sunlite Lever Adjusting Barrel
$1.79
- For MTB levers - 7mm x 1mm - Aluminum construction
Sunlite Nylon Cable Guide
$1.79
- Routes cables underneath the bottom bracket - Will not rust or corrode
Hope 6mm Copper Seal Washer (Bag of 10)
$1.90
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Hope Copper Washer for 5mm or Stainless Line (Bag of 10)
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
Hayes Caliper Rebuild Parts
$1.91 - $36.00
- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap
FSA Microspacer Headset Spacers
$1.99
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
FSA Pedal Washers
$1.99
Stainless steel pedal washers - Sold in pairs
Sunlite Connecting Link
$1.99
- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag
Sunlite Cottered Pin
$1.99 - $2.99
- Sunlite Cottered Pins
Sunlite Derailleur Bracket Bolt & Nut
$1.99
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
Sunlite Seatpost Plate Nut
$1.99
- M8 Top Plate Nut
Sunlite V-Brake Cable Boot
$1.99
- Rubber - Color: Black
Shimano Hoods And Road Shifter Service Parts
$2.00 - $12.00
- Hoods with (FD) are Flight-Deck compatible
Shimano M9000 Hose Cover
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
Sturmey-Archer 3-Speed Sprocket And Circlip
$2.00 - $5.00
- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability
Sturmey-Archer 8-Speed Sprocket And Circlip
$2.00
- 3-spline steel cogs for use with Sturmey 8-speed internal gear rear hubs - Flat or dished for tuning chainline. Chrome plated
Surly Tuggnut/Snuggnut Retaining Clip
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
Wheels Manufacturing Inc. Aluminum Headset Spacer
$2.00 - $23.00
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Sunlite Brake Pivot Bolt
$2.19
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
Sunlite Lever Adjusting Barrel OS
$2.19
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
Sunlite Recessed Brake Nut
$2.19
• Replacement nut for recessed caliper brakes
Origin8 Star Nut
$2.20
Standard replacement star nuts for threadless steerers.
FSA Star Nuts
$2.25
- Steel star nuts for anchoring headset compression in steel or alloy steerer tubes
Hope Brass Compression Olive
$2.39
Brass compression olive for Hope hydraulic disc brakes.
Hope X2 M4 V2 Mono Moto Pad Disc Brake Pads Clip
$2.40
Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes
Race Face Cinch Nylon Preloader Crank Assembly
$2.49
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
KMC 415H-OL Chain Connector
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
Odyssey Gyro G3 Detangler Upper Top Plate
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
Race Face Alloy Crank Spindle Spacer
$2.51
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Race Face Cinch Nylon Preload Collar and Screw
$2.51
- Preload collar for adjusting tension on bottom bracket bearings - For Race Face 30mm Cinch System cranks only
Race Face Chainring Bolt Pack
$2.54
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Origin8 Disc Washer
$2.55
Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag
Page 1 of 89 Next page