Parts & Accessories
This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo
Keep your reservoir funk-free with this cleaning brush kit from CamelBak.
Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!
Carry your gear tucked out of the wind with XLAB's Super Wing SMP Rear Carrier designed specifically for Selle SMP and Phenom saddles. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles just where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or losing bottles over bumps.
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
• KEEP LIQUIDS COOL - Silver exterior reflects heat away keeping liquids 25% cooler • FULL INSULATION - Bottle (sold separately) is completely covered for maximum insulation • INSULATED STRAW COVER - Keep liquids in straw cool for instant refreshment • EASY INSTALLATION - Simple install and removal for bottle cleaning • FOLDING STRAW ABILITY - Fold straw for optimum aerodynamics • PREMIUM MATERIAL - Full 3mm low-friction smooth skin insulating neoprene • Compatibility: Fits TORPEDO SYSTEM 50, 100 & 400 • Material: Neoprene • Weight: Bottle cover: 41 grams, Straw cover: 10 grams • Includes: Bottle cover, Straw cover, Instructions
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
Carry your gear behind you tucked out of the wind with XLAB's Carbon Wing Dual Rear Carrier. This versatile aero add-on provides options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages mount on the outside and tubes can go underneath (all accessories sold separately). The possibilities are endless. You also have 3 mounting options that fit most seats so you can place your bottles just where you want them. And, the Carbon Wing is made of stiff, super-light carbon so there's no twisting under load, no swaying while riding and no bouncing or losing bottles over bumps. It can be used with standard 7mm metal-rail saddles or carbon-rail saddles.
$6.12 - $16.62
- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options - Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included - Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included
SKS's Cage Box offers light, simple storage for your on-the-go essentials. With enough room for your tools, mini pump, and a tube, the Cage Box slides easily into your water bottle cage for a rattle-free, easy access storage solution.
This bladder kit has a two-liter bladder volume capacity and sports a center baffle system with a zip that ensures bladder remains flat and that liquid does not splash around in the bladder. It also enables proper cleaning, as you can unzip it to clean it inside out. It ships with two tubed and bite valves, namely a hands-free tube with with 180º valve and a standard tube with 45º valve. - Dishwasher-safe - Center baffle system with a zip - Bladder remains flat when zipped - Liquids do not splash around in bladder - Unzip to clean inside out - Hanging loops for drying – inside and outside the bladder - Tethered top hanging clip - FDA and EU approved: Phthalate, BPA and PVC-free - Burst-tested - Twist-Lock hose connector with auto shut-off valve - Ships with two tube and bite valve kits - Hands-free tube with 180º valve - Standard tube with 45º valve - One-touch quick release valve on the hands-free tube system - Helmet Velcro patch and loops to keep system in place for the hands-free system
BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates
Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g
Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams
Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.
CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!
The Fixy cap is the easiest cap to use, period. No push or pull of the mouth-piece required to open and close. Integrated heart-valve provides great flow, and a leak-free seal when not in use. - Self-sealing Heart Valve delivers a high rate of flow with a 100% leak-proof design - No push or pull required to open and close the Heart Valve - BPA-free plastic made from 100% FDA food-grade materials.
- Customize your race belt with this lightweight slide on accessory - Holds up to four gel packs - Compatible with all Ergo & Ultralight Belts
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
The Aerodrink BTA bracket offers secure bolt-on bottle mounting to aero bars and adapts to a variety of extensions. It includes a durable restraining strap for easy bottle installation and removal and an adapter to fasten horizontal BTA hydration systems. - Fits single and dual chamber systems along with horizontal BTA systems (with included adapter) - Attaches to bars with bolt-on adjustable wings that adapt to different aero bar width extensions - Adjusts to 140mm wide - Compatible with Profile Design FC25/FC35 hydration systems, Aero HC bottles, Aqualite bottles, Aerodrink bottles, Aquacell bottles, and standard bottles and cages - Made of Injected Nylon and Glass fiber - Weight: 130g
Deuter's Streamer 2.0 Reservoir is a great upgrade for any hydration system, and a step up from yucky, plastic-like reservoirs. The secret is the special lining that is anti-microbial and taste-free allowing you to keep water in the reservoir for days without fouling the taste. And, the 90-degree bite valve provides easy access, a cover to keep dirt off and excellent flow with a manual shut off that doesn't leak.
Deuter's Streamer 3.0 Reservoir is a great upgrade for any hydration system, and a step up from yucky, plastic-like reservoirs. The secret is the special lining that is anti-microbial and taste-free allowing you to keep water in the reservoir for days without fouling the taste. And, the 90-degree bite valve provides easy access, a cover to keep dirt off and excellent flow with a manual shut off that doesn't leak.
Page 1 of 2 Next page