Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$29.00
The Large Seat Pack mixes a low-profile, aesthetically pleasing shape with ample storage room (10x6.5x18cm) for your larger riding essentials. It attaches to the saddle easily via hook-and-loop straps, and it features a roll-up closure to keep its contents safe. You'll also find a reflective patch at the rear that increases your visibility to motorists in low-light conditions. - Secure attachment to the saddle with easily adjustable hook-and-loop and silicone straps to go around the seatpost. - Roll-up closure for ultimate flexibility of what you can carry and excellent water-resistance. - Expansion zippers for when you need to fit in more than you ever imagined. - Reflective patch on back that also allows for a Stix light to be clipped on securely with the fabric clip. - Dimensions (cm): 10 x 6.5 x 18
$30.00
The Medium Seat Pack mixes a low-profile, aesthetically pleasing shape with ample storage room (9x5x16cm) for your small riding essentials. It attaches to the saddle easily via hook-and-loop straps, and it features a roll-up closure to keep its contents safe. You'll also find a reflective patch at the rear that increases your visibility to motorists in low-light conditions. - Secure attachment to the saddle with easily adjustable hook-and-loop strap. - Roll-up closure for ultimate flexibility of what you can carry and super water-resistance. - Reflective patch on back that also allows for a Stix light to be clipped on securely with the fabric clip. - Dimensions (cm): 9 x 5 x 16
$99.99
The Handlebar Bag provides easy-access storage and works just as well on urban missions as on gravel escapes. Slide it onto the handlebar frame and fasten it with straps (note that the handlebar frame is not included and must be bought separately for the handlebar bag to function on a bike). Should you not want to leave it on your bike, it detaches easily and you can carry it with the removable shoulder strap. Elastic mesh pockets on the top and sides for items you want close at hand. Two attachment points on the front for tent poles, accessories, or the Specialized/Fjällräven Snack Bag. Note: The lid and seams are not sealed, but the lining is waterproof, so the bag offers protection from the rain. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Weather-resistant, semi-rigid design in Vinylon F with lining in 100% recycled nylon. - One-hand easy-opening closure with an elastic cord loop. - Mesh pockets on top and sides and zippered inside pockets. - Reflective logo increases your visibility in low-light conditions. - Volume- approx. 10 L - Material- Vinylon F (100% vinylal)
$5.00
Mount your Stix to either your handlebars or seatpost with this versatile Stix light mount with a flexible silicon strap. - Works with handlebars and seatposts from 22.2mm up to 35mm in diameter. - Second loop will fit most seatstay diameters. - Mount only, light sold separately
$5.00
Easily mount the Specialized Stix to your helmet with this Stix Helmet Strap mount that attaches securely through your helmet's vents. - Allows Stix light to be mounted horizontally or vertically. - Includes hook-and-loop strap to securely mount to helmet through vents.
$6.00
Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.
$39.99
A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch. - Headlight or taillight—you decide. - Press-and-hold for two seconds to shift between white and red modes. - Three white modes including: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens). - Five red modes including: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - 2- to 20-hour runtime. - Fresnel lens for maximum visibility in all directions. - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately). - Red/Green battery charge level indicator. - Additional mounting options available separately.
$20.00
This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm
$24.99 - $25.00
The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g
$30.00
• 150 lumen headlight • 3 red led taillight • Battery headlight: 3 'AA' included • Battery tail light: 2 'AAA' included • Runtime headlight: 30-70 hours depending on setting • Runtime taillight: 200 hours max
$29.00
Quick Overview - 270 Degree High Visibility Design - Highly Adjustable Mounting System - 30 Lumens - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - 30 Lumen Max Output - 4 LED Chip - Finned Lens Design Provides 270 Degree Visibility - Blue LED Charge Indicator - Daytime Flash Mode - Up To 34 Hours Runtime - Micro USB Rechargeable Specs: Solid Modes: - High – 15 Lumens / 2 hrs - Low – 6 Lumens / 6 hrs Flash Modes: - Daytime Flash – 30 Lumens / 34 hrs - High Flash – 15 Lumens / 19 hrs - Low Flash – 6 Lumens / 34 hrs - Weight: 26 Grams w/ Bracket Size: - Overall Height – 56.3mm (2.22?) - Main Cylindrical Body Width – 21.7mm (0.86?) - Widest Fin Width – 32.3mm (1.27?) - Charge Time: 2 hrs Using 500mA USB Wall Charger Product Package Contents: - (1) UTM-30 Cosmo 30 Lumen Tail Light - (1) Micro USB Charging Cable - (3 Sizes) Rubber Mounting Inserts - (3 Sizes) Rubber O-Ring Mounting Straps *Please note, flickering or pulsating observed in video is due to, “strobe effect,” a video capture phenomenon and is not representative of what is seen by the naked eye (steady shining light)*
$56.00
USM-350 E-Lume 350 Lumen Headlight - All-In-One Design - Extruded Aluminum Body - Press and Hold Button Lock - Daytime Flash Mode - Up To 90 Hours Runtime - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - USB Charging Cable UTM-30 Cosmo 30 Lumen Tail Light - 270 Degree High Visibility Design - Highly Adjustable Mounting System - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable
$81.00
USM-600 E-Lume 600 Lumen Headlight - All-In-One Design - Extruded Aluminum Body - Press and Hold Button Lock - Daytime Flash Mode - Up To 90 Hours Runtime - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - USB Charging Cable UTM-60 Cosmo 60 Lumen Tail Light - 270 Degree High Visibility Design - Highly Adjustable Mounting System - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable
$25.00
Ride smart and more safely with Serfas Bar End Mirrors to help increase awareness and visibility of your surroundings as you ride. - Unbreakable Stainless Steel Lens - Base: Eco-Friendly High Impact Nylon Fiber - Universal Design For Left & Right - Fits Handlebars With 16mm-22mm Diameter Bar Ends - Lens: 62mm Diameter
$35.00 - $37.00
Keep your belongings safe & dry with the completely waterproof Monsoon Bag. The roll top, elastic closure mechanism & quick release saddle rail bracket make the Monsoon Bag easy to install & built to endure the elements. Features: - Waterproof Construction - Roll Top Closure System - Quick Release Saddle Rail Mount - Reflective Logo Highlights - Material: 210D Ripstop Specs: - Size: 5.5? x 2.5" x 3.5"/ 48 Cubic Inches (Medium), 6.5" x 2.5" x 4.5"/ 73 Cubic Inches (Large)
$5.00
Replacement Part – TST Tail Light Belt Clip Improved design keeps light more secure on belt or bag strap. Compatible With: TST-70 TST-100 TST-150 TBT-50R TBT-120F
$6.00
Replacement Part – Clip Compatible With: - TL-411 - TL-80 - UTLA-8 - USLA-8 - UTL-60 - UTL-30 - UTL-15
$5.00
Replacement Part – Universal Rack Mount - Fits all Serfas tail lights (Except TST-70, TST-100, & TBT-50R) - Bolts to rack for easy removal of tail light
$19.99
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.
$38.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
$25.00
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
$11.00 - $24.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$49.99
- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings
$19.99
REAR SHOCK SERVICE KIT BASIC- MONARCH WITH AUTOSAG SPECIALIZED B1
$5.00 - $37.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
$8.99 - $18.50
Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only
$9.99 - $21.99
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
$19.99
Converts quill style forks to use threadless stems.
$16.99
A great way to make cleaning easier is to remove your wheels. While this may seem excessive, removing the wheels from your bike opens up many tight areas that are tough to clean, allowing easier access and better visibility of these surfaces. The Pedro's Chain Keeper was designed with this wheels-off technique in mind and makes sure your chain stays off your frame, preventing damage and keeping your drivetrain free to turn as is commonly needed during cleaning. Try it out! The Chain Keeper inserts into the right rear dropout when the wheel is removed for cleaning, storing, or transporting your bike. The quick-release lever allows for fast and easy installation and removal.
$15.99
Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.
$14.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$12.99
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$71.99
Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.
$27.95
The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 39mm (e.g. Shimano Dura-Ace 9000 series and XTR 980 series) as well as 16-notch bearing cups with an outside diameter of 48.5mm (e.g. FSA MegaEvo).
$33.95
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
$10.99
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
$10.99
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
$19.95
Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)
$19.95
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
$7.99
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
$4.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
$20.95
The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.
$10.95
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
$8.99
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
$5.99
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
$33.95
The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).
$19.95
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
$21.99
Park's Hydraulic Brake Piston Press is used to set or reset the piston(s) inside hydraulic disc brake calipers during installation, maintenance and repair. Just push it into the caliper to wedge the piston into place. It's made of tough tool steel with a comfortable and oversize rubber handle for a great grip.
$29.99
The MTC-40 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible driver - Combo cross/straight tip screwdriver - 5- to 12-speed compatible chain tool* - Rotor straightener - CO2 cartridge inflator adaptor - Bottle opener - Key ring holder - Weight: 217g (7.65 ounces) *The MTC-40 chain tool will not peen Campagnolo 11-speed chain rivets (see CT-4.3 or CT-6.3)
$16.99
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
$28.99
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
$43.99
Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.
$0.86 - $3.99
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
$20.95
If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.
$8.49
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
$5.99
• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers
$8.49
Park's Tire and Tube Repair Kit is a riding essential. It features Park’s glueless Super Patch Kit and strong nylon Tire Levers for quick and easy flat repairs. The kit comes with 3 levers, 6 patches in a small container, and a piece of sandpaper (for roughing the tube to prepare it for patching).
$10.95
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
$11.99
Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.
$16.99
Ever wish your cable was longer so that you could lock up your bike and accessories? The Akita Cable has loops on each end allowing it to act as an extension for any other lock. These cables are made from some of the thickest, toughest and most flexible steel in the industry, so you can lock up anything you want and walk away with peace of mind.